![]() Connect it directly from the rear of the PS3 to your MixAmp. To provide the best audio to your MixAmp, we recommend using a TOSlink optical cable (sold separately) for full Dolby® Digital Surround Sound.A second 3.5mm-to-3.5mm cable is included in the PS3 Adapter package, connect this to the GREEN jack on the PS3 Adapter package, and then attach it to either one of the Daisy chain ports (after the red Daisy chain connector is removed). Connect one of the included 3.5mm-to-3.5mm cables from the A40’s PC MIC output to the RED connector on the PS3 Adapter.Connect the included USB-to-USB Mini ‘B’ cable to an available USB port on the PS3 and attach the other end to the USB input on the MixAmp.However, pay special attention to wiring the USB Music Fairy as it’s a bit different than most other adapters we’ve tried. ![]() The USB Music Fairy is fully compatible with the PS3 out of the box. Using the USB Music Fairy with the Astro Original MixAmp This driverless USB adapter enables you to run voice communication as a dedicated voice channel, vital if you want to use the balancing features of the A40 MixAmp. To get the Astro Original MixAmp going full speed on your Playstation 3, with fully adjustable GAME/VOICE balance control, we recommend the USB Music Fairy. If you have the Astro MixAmp (purchased after November 19th 2009 from the US store), please click here for the Astro MixAmp PS3 Setup Guide. Using the Astro Original MixAmp with the PS3 ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |